Electrical Engineer

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD to recruit and appoint qualified candidates to positions in the competitive service. About the Position: Technical expert in the highly complex Electronic Security Center (ESC)/Electronic Security Systems Mandatory Center of Expertise (ESS-MCX) for USACE, located at the U.S. Army Engineering and Support Center, Huntsville Provide expertise to field operating Divisions/Districts/Agencies in resolution of operational and technical problems before and after Electronic Security Systems (ESS) acceptance. Resolve Electronic Security Systems (ESS) technical and fielding issues for hardware/software in the design, installation, and operations phases of deployment. Conduct special studies of state-of-the-art Electronic Security Systems (ESS application and special problems, which arise during design, construction, testing, and operation. Verify all design analyses and calculations prior to start of Division/District detail design activities. Review and evaluate all proposed individual project changes for overall impacts and potential precedent setting actions. Prepare designs for application of unique equipment or systems for complex and highly sophisticated state-of-the-art instrumentation systems. Resolve unique one-of-a-kind problems requiring new techniques and state-of-the-art design considerations. Review contractor's ESS proposals, including hardware, software, sensors, communications, and test/checkout procedures. Review contractor's submittals/shop drawings for accuracy, adequacy, and conformance with contract drawings and specifications, and contractor's test plans and procedures. Who May Apply: US Citizens In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Electrical Engineer: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure • Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test • Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses • Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum • Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: GS-11 Specialized Experience: One year of specialized experience which includes: 1) Assisting in technical engineering evaluations for electronic security systems or electrical systems; 2) Assisting in coordinating technical requirements and operational procedures with customer organizations and project stakeholders; 3) Assisting in drafting statements of work (SOW) for electronic security systems or electrical systems; and 4) Reviewing routine contractor shop drawings and submittals. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09). OR Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Electrical Engineering. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. GS-12 Specialized Experience: One year of specialized experience which includes: 1) Performing independent engineering design, analysis, and/or technical problem resolution for state-of-the-art electronic security systems or electrical systems; 2) Providing technical advisory support across multiple defense or federal agencies and contractor teams; 3) evaluating contractor engineering proposals and project specifications; and 4) Reviewing complex design packages for security systems or electrical systems. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). Some federal jobs allow you to substitute your education for the required experience in order to qualify. The GS-12 job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/