[Job Radar](https://jobradar.live/) / [Jobs](https://jobradar.live/ilanlar) / Senior Field Service Technician - Air Handlers, CAHU & CRAH Active On-site Amarillo, Texas, United States Posted · 03.10.2026 Ashby (US) # Senior Field Service Technician - Air Handlers, CAHU & CRAH XNRGY Climate Systems Overview XNRGY Climate Systems designs and manufactures advanced cooling systems for data centers and other mission-critical environments. Our field service team starts up, commissions, troubleshoots, and services high-performance air-handling equipment at customer sites across the United States. About the Role The Senior Field Service Technician – Air Handlers (CAHU/CRAH) is a Level 3 technical resource responsible for field commissioning, service, and complex troubleshooting of custom air handling units and computer room air handlers. This technician verifies that fan arrays, controls, sensors, filtration, chilled-water coil controls, and building-management-system interfaces operate as designed. The role works independently at customer sites and coordinates closely with customers, project teams, controls partners, and other field technicians. Travel and Location • This is a field-based position with frequent travel to customer facilities and data center projects throughout the continental United States. • Typical assignments follow either a two-weeks-in-the-field / one-week-home schedule or a three-weeks-in-the-field / one-week-home schedule, depending on project needs. • Primary project locations may include Amarillo, Texas; Abilene, Texas; and other locations as business needs require. • The technician must be comfortable working at active construction and operating sites and coordinating travel around project schedules. Why Join • Work on custom cooling equipment supporting next-generation data centers and other critical facilities. • Take ownership of field start-up, commissioning, and service work with opportunities to build technical depth and mentor other technicians. • Earn additional compensation through overtime and travel, based on hours worked and applicable company policies. • Join a growing service organization supporting projects across the United States. Key Responsibilities • Perform delivery inspections of air-side equipment, document condition, and record damage with clear written notes and photographs. • Verify installation readiness, including unit clearances, filters, plenum and duct connections, and condensate arrangements before start-up. • Check electrical supply, fan rotation, and safety devices; identify deficiencies and coordinate corrective action with the appropriate site team. • Configure and address electronically commutated (EC) fans, verify fan-array addressing, and confirm controller network settings and connectivity. • Verify temperature and humidity sensors and document calibration results; inspect filtration installation and any fitted disinfecting filtration system. • Commission air-handler controls integration with the building management system (BMS), including point-to-point verification and completed records. • Commission fan-array control and verify specified N-1 redundancy behavior using approved procedures. • Measure and verify airflow, static pressure, and fan performance against approved design criteria and project documentation. • Commission chilled-water coil control valves and verify capacity-control operation across the required operating range. • Troubleshoot mechanical, electrical, controls, communication, and air-side performance issues using drawings, wiring diagrams, control sequences, technical manuals, a laptop, and appropriate test instruments. • Complete pre-functional, commissioning, point-to-point, calibration, performance, and service records accurately and at the point of work. • Communicate equipment status, deficiencies, risks, and next steps to customers and internal project teams; provide clear turnover information. • Share technical knowledge with junior technicians and support consistent, safe execution of field procedures. Required Qualifications • At least 7 years of hands-on commercial or industrial HVAC field service, start-up, or commissioning experience, including substantial work with air handlers, CRAH/CAHU equipment, or fan arrays. • Demonstrated ability to commission and troubleshoot EC fan arrays, HVAC controllers, sensors, and BMS-connected equipment. • Working knowledge of airflow, static pressure, fan performance, filtration, condensate management, and chilled-water coil control. • Ability to read and apply electrical schematics, wiring diagrams, control sequences, equipment submittals, and technical manuals. • Ability to use a laptop and field instruments to configure equipment, verify communications, collect measurements, and document results. • Strong written and verbal communication skills, sound customer judgment, and the ability to work independently at customer sites. • Valid driver's license and ability to meet company requirements for travel to U.S. customer locations. • Ability to work safely at construction and operating sites, including climbing ladders, working around energized equipment under approved procedures, and lifting or moving equipment and materials as required. Preferred Experience • Experience with custom-manufactured air handlers or data center CRAH equipment in mission-critical environments. • Experience with BACnet or other BMS communication protocols, controller network configuration, and point-to-point commissioning. • Experience verifying fan-array redundancy, chilled-water valve response, sensor calibration, and air-side performance against design requirements. • HVAC, electrical, refrigeration, or controls trade-school training, or equivalent technical education and field experience. • EPA Section 608 certification if assigned work includes refrigerant-containing equipment. What You Bring • A methodical approach to troubleshooting: verify the operating conditions, use the drawings and sequence, test the system, and document what you find. • A strong commitment to safety, quality, and complete commissioning records. • The confidence to explain technical issues clearly and coordinate practical solutions with customers and project partners. • A team-first attitude and willingness to coach developing technicians while continuing to learn new equipment and controls. • Flexibility to travel and adjust to changing project schedules in a field-based role. This job was verified from Ashby (US). Applications are completed on the original source. [Apply on the original listing ↗](https://jobradar.live/ilan/3cf5c3bb-64e5-4dbe-b23a-5dc02ae168fd/git) ## Stop searching one by one for roles like this. Upload your resume or enter your target roles to see your first 3 matches for free. [Find jobs for me →](https://jobradar.live/uye/kayit) Your resume is never shared with employers; it is processed only for matching. Something wrong with this job? ## Similar jobs [XNRGY Climate Systems Jobs](https://jobradar.live/company/xnrgy-climate-systems) · [Jobs in Texas](https://jobradar.live/jobs/texas) · [Technician Jobs in Texas](https://jobradar.live/jobs/texas/technician) · [Jobs by location](https://jobradar.live/jobs) · [Jobs by company](https://jobradar.live/company) - [Floor Technician - Avir at Windcrest - EVS Labor](https://jobradar.live/ilan/71eaf352-9d51-45dc-81e2-c9ec560c2e42) Aramark · Abilene, TX - [Apprentice Technician - Horny Toad Harley-Davidson](https://jobradar.live/ilan/d18351f0-9859-4079-98b9-48df1f9ea762) Sonic Automotive · Temple, TX, United States - [General Service Technician / Mechanic | Up To $22/Hr* & Weekends Off | Southwest Fort Worth](https://jobradar.live/ilan/422c8599-100a-46a0-8cbc-98a8f344cea0) Christian Brothers Automotive · Fort Worth, Texas, United States - [Lead Veterinary Technician](https://jobradar.live/ilan/409da324-5e50-4e03-a5bb-77a3db4d6277) Alliance Animal Health · San Antonio, TX, United States - [Optometric Technician - Medical Assistant](https://jobradar.live/ilan/11c3d350-9cf3-464d-9ae8-f768d1cc9ec3) National Vision · Texas City, TX, United States - [Lead Field Service Technician - Chillers](https://jobradar.live/ilan/93d39efb-7ce8-4d59-82f6-c643a4a7803c) XNRGY Climate Systems · Amarillo, Texas, United States - [Field Reliability Technician](https://jobradar.live/ilan/17877312-9d5a-41b2-aed1-e6b50fdc2196) Base Power Company · Austin, TX, Texas, United States - [Registered Behavior Technician (RBT)](https://jobradar.live/ilan/ed91b5c8-5748-4ade-a17b-1549d86d13fe) Alpaca Health · Greenville, TX, Texas, United States