Engineering Technician
Veterans Health Administration
This Engineering Technician position in the Facilities Management Service at the Rocky Mountain Regional VA Medical Center (RMRVAMC) and is under the direct supervision of the Facilities Improvements Section Supervisor. As a technically experienced member of the Projects Team, the incumbent develops and manages a wide variety of complex construction projects, implements engineering problem solutions involving projects, maintenance and operations of buildings, grounds, utilities, etc.
Duties may include, but are not limited to: Incumbent uses technical experience, engineering judgment, and focused research to devise solutions, designs, and methodologies to ensure the successful execution of Non-Recurring Maintenance and other facility projects. Incumbent is responsible for the overall management of a wide variety of construction and maintenance projects from concept through closeout. Maintains facility master digital files and building model by utilizing the full complement of Autodesk Suite, specifically Revit and AutoCAD. Prepares, develops and reviews engineering CAD and Revit files, plans, sketches, specifications, equipment schedules and other references applicable, or pertaining to, projects to assure compliance with VA Modeling and File Standards. Incumbent provides technical engineering expertise and assistance to various facility stakeholders. knowledge of engineering concepts, principles, and practices relevant to large construction activities sufficient to evaluate, advise on, oversee, and/or direct work to ensure its quality and compliance with plans, design, and specifications, and develop plans, specifications, and construction requirements such as schedules, costs, labor, and materials. knowledge of a wide range of general engineering concepts, principles, and methods applicable to varied and complex problems, projects, or studies that may include diverse general engineering or other conditions. Knowledge of Federal, State, local, and VA policies, directives, regulations and operating procedures and engineering, architectural and construction practices in government agencies and in the private sector sufficient to evaluate and recommend adoption of new or enhanced approaches. Ability and knowledge to assemble, correlate and interpret a variety of technical data and to determine the implications, project trends and apply conclusions and to communicate such information orally and in writing, in a clear, logical and concise manner when providing management advisory and technical services. Incumbent works with engineers and architects in developing designs, plans and specifications for new construction, renovation, and maintenance and repair projects to achieve compliance with federal, state and local regulations and customer requirements. The work involves dealing with a variety of technical engineering/architectural problems which must be analyzed. Incumbent works with project managers, engineers, scientists, and technical specialists in planning construction and maintenance and repair (M&R) projects to achieve compliance with federal, state and local regulations and customer requirements. Prepares, develops and reviews engineering CAD and Revit files, plans, sketches, specifications, equipment schedules and other references applicable, or pertaining to, projects to assure compliance with VA Modeling and File Standards. Utilizes established layering schemes or creates new layers as appropriate that are consistent with existing VA Construction and Facilities Management (CFM) and American Institute of Architects (AIA) standards, prints and plots scaled versions of drawings using large-scale plotter/printers. Promotion Potential: The selectee may be promoted to the full performance level without further competition when all regulatory, qualification, and performance requirements are met. Selection at a lower grade level does not guarantee promotion to the full performance level. Work Schedule: Monday
• Friday 7:00am
• 3:30 pm Telework/AD Hoc: This position may be authorized for Ad-hoc telework Virtual: This is not a virtual position. Position Description/PD#: Engineering Technician/PD14900A, PD14901A, PD14902A, PD14933-A, and PD14932-A Physical Requirements: Regular and recurring work generally involves sitting at a desk and sitting in conferences and meetings except for occasional visits to activity work sites. Occasional use of automobile and public conveyance may be required. No special physical exertion is required.
To qualify for this position, applicants must meet all requirements by the closing date of this announcement, 12/02/2026. Time-In-Grade Requirement: Applicants who are current Federal employees and have held a GS grade any time in the past 52 weeks must also meet time-in-grade requirements by the closing date of this announcement. For a GS-07 position you must have served 52 weeks at the GS-06. For a GS-08 position you must have served 52 weeks at the GS-07. For a GS-09 position you must have served 52 weeks at the GS-08. For a GS-10 position you must have served 52 weeks at the GS-09. For a GS-11 position you must have served 52 weeks at the GS-10.The grade may have been in any occupation, but must have been held in the Federal service. An SF-50 that shows your time-in-grade eligibility must be submitted with your application materials. If the most recent SF-50 has an effective date within the past year, it may not clearly demonstrate you possess one-year time-in-grade, as required by the announcement. In this instance, you must provide an additional SF-50 that clearly demonstrates one-year time-in-grade. You may qualify based on your experience and/or education as described below: Individual Occupational Requirements (IOR) Series Definition: This series covers technical positions supervising, leading, or performing work involving applying a practical knowledge of the: Methods and techniques of engineering or architecture; and Construction, application, properties, operations, and limitations of engineering systems, processes, structures, machinery, devices, and materials. Basic Requirements: Specialized Experience (for positions at GS-4 or equivalent and above): Examples of qualifying specialized experience include technical work in: drafting, surveying construction estimating, physical science, mathematics, aerospace, architecture, chemicals, electrical or mechanical systems, mining, petroleum, or nuclear systems. Experience in a trade or craft may be credited as specialized experience when the work provided intensive knowledge of engineering principles, techniques, methods, and precedents. Examples are trade positions with substantial developmental, test, or design responsibilities such as: Planner and estimator who analyzed designs for production purposes. Instrument maker or model maker who performed design or development work on devices fabricated Certification: Engineering technicians may be certified by the National Institute for Certification in Engineering Technologies, an organization sponsored by the National Society of Professional Engineers. Certification by the Institute will be helpful as a measure of the technician's quality of experience. Specialized Experience GS-07: You must have one year of specialized experience equivalent to at least the next lower grade GS-06 in the normal line of progression for the occupation in the organization. Examples of specialized experience would typically include but are not limited to: Basic knowledge and understanding of some of the guidelines, precedents, and technical engineering principles and methods and the ability to apply this knowledge to construction, maintenance, repair, and renovation projects where precedence has been established. The incumbent applies such knowledge to technical services rendered in carrying out engineering functions, potentially including site investigations, evaluation and report preparation. Understanding of application of established engineering approaches to troubleshoot and resolve building maintenance and construction issues. Basic knowledge across several building disciplines, potentially including HVAC, electrical, plumbing, fire life safety, low voltage, architectural/finishes, and others. General understanding in how to determine the specific discipline and equipment information requirements needed to answer questions and to resolve problems in relationship to the overall building functions, including the analysis and recommendation of methods, procedures, and techniques based on general engineering practices. Ability to assemble, correlate, and interpret technical data, to analyze the implications, project trends, recommend conclusions, and to communicate such information orally and in writing. OR, Education: Applicants may substitute education for the required experience. To qualify based on education for this grade level you must have/ possess graduate education or an internship meets the specialized experience required above GS-5 only in those instances where it is directly related to the work of the position. One full year of graduate education meets the requirements for GS-07. One year of full-time graduate education is considered to be the number of credit hours that the school attended has determined to represent 1 year of full-time study. If that information cannot be obtained from the school, 18 semester hours should be considered as satisfying the 1 year of full-time study requirement. Part-time graduate education is creditable in accordance with its relationship to a year of full-time study at the school attended. (TRANSCRIPT REQUIRED). Specialized Experience GS-08: You must have one year of specialized experience equivalent to at least the next lower grade GS-07 in the normal line of progression for the occupation in the organization. Examples of specialized experience would typically include but are not limited to: General knowledge and understanding of guidelines, precedents, and technical engineering principles, practices and methods and the ability to apply this knowledge to moderately difficult construction, maintenance, repair, and renovation projects where precedence has been established. The incumbent applies such knowledge to technical services rendered in carrying out a range of engineering functions, including site investigations, evaluation and report preparation. May be assigned to assist on more complex construction projects. The incumbent evaluates user requirements, defines procedures, and validates methods for planning, delivery, and execution of difficult engineering projects using generally standardized methods and techniques. Makes informed decisions on planning and execution of work and advises leadership and IPT. Ability to apply established engineering approaches to troubleshoot and resolve building maintenance and construction issues. General knowledge across a range of building disciplines, including HVAC, electrical, plumbing, fire life safety, low voltage, architectural/finishes, and others. Skill in understanding and determining the specific discipline and equipment information requirements needed to answer questions and to resolve problems in relationship to the overall building functions including the analysis and selection of proper methods, procedures, and techniques based on a general knowledge of engineering practices. Knowledge and ability to apply standard engineering and maintenance practices to solve facility problems with practical solutions within space and budgetary limitations, with due consideration for environmental issues. Basic knowledge of VA policies, directives, regulations, operating procedures, information flow and prevailing engineering practices in government agencies and in the private sector sufficient to evaluate and recommend adoption of new or enhanced approaches. Knowledge of regulatory codes such as OSHA, IBC, NFPA, NEC, TJC, the VA TIL and similar references OR,
You must be a U.S. Citizen to apply for this job To be considered for this position, you must complete all required steps in the process. In addition to the application and questionnaire, this position requires an online assessment. The online assessment measures critical general competencies required to perform the job. Selective Service Registration is required for males born after 12/31/1959 Physical Requirements: The work required does not inherently include any physical requirements essential for successful job performance that could not otherwise be performed with accommodation or workplace adjustment. A pre-placement physical examination is not required. Subject to background/security investigation Selected applicants will be required to complete an online onboarding process. Acceptable form(s) of identification will be required to complete pre-employment requirements (https://www.uscis.gov/i-9-central/form-i-9-acceptable-documents). Effective May 7, 2025, driver's licenses or state-issued identification cards that are not REAL ID compliant cannot be utilized as an acceptable form of identification for employment. Participation in the seasonal influenza vaccination program is a requirement for all Department of Veterans Affairs Health Care Personnel (HCP) As a condition of employment for accepting this position, you will be required to serve a 1-year probationary period or 2-year trial period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: your performance and conduct; the needs and interests of the agency; whether your continued employment would advance organizational goals of the agency or the Government; and whether your continued employment would advance the efficiency of the Federal service. Upon completion of your probationary period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
Qualifications: Education: Applicants may substitute education for the required experience. To qualify based on education for this grade level you must have/ possess graduate education or an internship meets the specialized experience required above GS-5 only in those instances where it is directly related to the work of the position. One full year of graduate education meets the requirements for GS-07. One year of full-time graduate education is considered to be the number of credit hours that the school attended has determined to represent 1 year of full-time study. If that information cannot be obtained from the school, 18 semester hours should be considered as satisfying the 1 year of full-time study requirement. Part-time graduate education is creditable in accordance with its relationship to a year of full-time study at the school attended. (TRANSCRIPT REQUIRED) Specialized Experience GS-09: You must have one year of specialized experience equivalent to at least the next lower grade GS-08 in the normal line of progression for the occupation in the organization. Examples of specialized experience would typically include, but are not limited to: Knowledge of computer-aided drafting programs and drafting skills for engineering concepts, principles and practices applicable to the full range of technician duties concerned with the design and layout of a variety of drawings. Comprehensive and practical knowledge and understanding of engineering/architectural and construction principles, practices and methods sufficient to adapt to the specific situation, to solve a variety of problems, to technically review engineer designs, construction methods and details, concepts and proposed designs and specifications. Applies such knowledge to technical services rendered in carrying out a range of engineering functions, including evaluation and report preparation. Comprehensive knowledge of VA policies, directives, regulations and operating procedures and engineering, architectural and construction practices in government agencies and in the private sector to evaluate and recommend adoption of new or enhanced approaches.. OR, Education: Applicants may substitute education for the required experience. To qualify based on education for this grade level you must have / possess two (2) full years of graduate education (e.g. 36 semester hours) or a master's degree. (TRANSCRIPT REQUIRED). Specialized Experience GS-10: You must have one year of specialized experience equivalent to at least the next lower grade GS-09 in the normal line of progression for the occupation in the organization. Examples of specialized experience would typically include, but are not limited to: Knowledge of computer-aided drafting programs and drafting skills for engineering concepts, principles and practices applicable to the full range of technician duties concerned with the design and layout of a variety of drawings. Comprehensive and practical knowledge and understanding of engineering/architectural and construction principles, practices and methods sufficient to adapt to the specific situation, to solve a variety of problems, to technically review engineer designs, construction methods and details, concepts and proposed designs and specifications. Applies such knowledge to technical services rendered in carrying out a range of engineering functions, including evaluation and report preparation. Comprehensive knowledge of VA policies, directives, regulations and operating procedures and engineering, architectural and construction practices in government agencies and in the private sector to evaluate and recommend adoption of new or enhanced approaches. Specialized Experience GS-11: You must have one year of specialized experience equivalent to at least the next lower grade GS-10 in the normal line of progression for the occupation in the organization. Examples of specialized experience would typically include, but are not limited to: Knowledge of computer-aided drafting programs and drafting skills for engineering concepts, principles and practices applicable to the full range of technician duties concerned with the design and layout of a variety of drawings. Comprehensive and practical knowledge and understanding of engineering/architectural and construction principles, practices and methods sufficient to adapt to the specific situation, to solve a variety of problems, to technically review engineer designs, construction methods and details, concepts and proposed designs and specifications. Applies such knowledge to technical services rendered in carrying out a range of engineering functions, including evaluation and report preparation. Comprehensive knowledge of VA policies, directives, regulations and operating procedures and engineering, architectural and construction practices in government agencies and in the private sector to evaluate and recommend adoption of new or enhanced approaches. Independently perform calculations such as estimating quantities of various materials, and selection and adaptation of standard details to meet project requirements. Ability to independently interpret drawings, plans and specifications and to identify and correct deficiencies in conflicting data. Extensive knowledge and understanding of multiple electronic systems (e.g., Adobe Acrobat, AutoCAD, MicroStation, Revit, Bentley BIM building information modeling applications, Project Wise and/or similar software packages) and related software requirements and their capabilities to independently make technically-related decisions and to verify functionality of system and end product for completion of specifications drawing files in support of the Health Care System's engineering projects. For more information on these qualification standards, please visit the United States Office of Personnel Management's website at https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/.
This job was verified from USAJOBS. Applications are completed on the original source.
Apply on the original listing ↗
Something wrong with this job?
Own this listing? Ask us to remove it